MOBIL with centre hole

Especially for chemical and bio-technological processes, where it is an advantage to be able to stir in a sterile manner and free of vibrations, without additional aperture, stirring shaft, or shaft exit, directly within a vessel - even in vessels with bottom drains. In this way, nothing can enter the vessel through the stirring drive and contaminate its valuable content. The stirring drive, which is remotely controlled by a TELEMODUL 40 M control unit, by a TELEMODUL 80 M if more stirring power is required, is mounted directly below vessels or containers. These stirring drives are ideal for round-bottomed flasks as well as round and cylindric glass receptacles, with or without heating jacket, possessing a bottom drain. This means that this magnetic stirrer is suitable, for instance, for stirring a heated vacuum distillation column. Aluminum or stainless steel vessels can be used as well. OEM versions for integration are available on request.

Type Order No.:
MOBIL with centre hole Ø 50 mm
without control unit
HP 55001
MOBIL with centre hole Ø 80 mm
without control unit
HP 58001
TELEMODUL 40 M
115V:
HP 90540 U
TELEMODUL 80 M
115V:
HP 90580 U
Control unit TELEMODUL 40 M or TELMODUL 80 M to be ordered separately.


Specifications:

Type:

MOBIL with centre hole

Ø 50

Ø 80

Stirring points:

1
Stirring volume per point:

5 - 150 l

5 - 50 l
Stirring power:

40 or 80 W
Speed:

100 - 990 rpm
Maximum torque (shaft):

15 - 30 Ncm
Dimensions (WxDxH):

180 x 425 x 75 mm

200 x 425 x 75 mm
Weight (stirring drive):

8 kg

12 kg
Overheating protection:

75° C
Operating voltage:

24 VDC

Construction:

Housing Material:

Protection type (DIN 40050)

Control Cable

.

Aluminum

IP 42

2 m

Environment:

Ambient temperature:

.

-10° to +120° C in dry air

Power supply unit / Control unit

Control

Control unit TELEMODUL

.

Remote

40 M or 80 M

We reserve the right to make technical alterations without notice.

| BACK |